Repeater Loopback (Eia-530) - Paradyne 7974 User Manual

8. Testing

Repeater Loopback (EIA-530)

A Repeater Loopback loops the signal being sent from the data port back to the
data port. AIS is sent to the DSL port.
Procedure
To run an EIA-530 Repeater Loopback:
The Repeater Loopback cannot be started when any other loopback test is in
progress.
8-12
DSL
Framer
All Ones CAP
Port
1. Position the cursor at the Start command next to Repeater Loopback on the
SYNC Data Port Tests screen.
2. Press Enter.
The Start command is changed to Stop.
3. To manually stop the test, verify that the cursor is positioned at the Stop
command and press Enter.
December 2001
NTU/LTU
Port
EIA-530
Interface
Port
98-15933-01
7900-A2-GB21-20