Network Repeater Loopback (G.703)
A Network Repeater Loopback (RLB) loops the signal being sent from the data
port back to the data port. AIS is sent to the DSL port.
Procedure
To run a G.703 Network Repeater Loopback:
The G.703 Network Repeater Loopback cannot be started when any other
loopback test is in progress.
7900-A2-GB21-20
CAP
DSL
Port
AIS
Transceiver
1. Position the cursor at the Start command next to Network Repeater Loopback
on the Network & G.703 Tests screen.
2. Press Enter.
The Start command is changed to Stop.
3. To manually stop the test, verify that the cursor is positioned at the Stop
command and press Enter.
December 2001
CAP
E1
LIU
Framer
Framer
8. Testing
G.703
Port
01-16825-01
8-15