Configuring the Unit Using Configuration Menus
Configuration option settings determine how the standalone TDM SDSL
termination unit operates. Use the Configuration menus to select, display,
or change configuration option settings.
The termination unit is shipped with factory settings in the Default Factory
Configuration area. You can find default information by:
T
T
The termination unit has two sets of configuration option settings.
The Current Configuration matches the Default Factory Configuration until
modified and saved by the user. If the factory default settings do not support
your network's configuration, you can customize the configuration options for
your application.
7900-A2-GB21-20
NOTE:
The Hotwire 797x TDM SDSL Standalone Termination Unit is preconfigured
as an NTU. If using the unit as an NTU, you may not need to change any
configuration option settings.
Referring to
Appendix A, Configuration Options
Accessing the Configuration branch of the standalone termination unit's menu.
Configuration Option Area
Current Configuration
Default Factory Configuration
December 2001
3. Initial Startup and Configuration
.
Configuration Option Set
The unit's currently active set of configuration options.
A read-only configuration area containing the factory
default configuration options.
3-7