8. Testing
G.703 Tests (Model 7976)
To access the Network & G.703 Tests screen, follow this menu selection
sequence:
Use the Command column to start or stop a test. When the Status column shows
that a test is Inactive, Start is displayed; when a test is Active, Stop is displayed.
Position the cursor at the desired Start or Stop command and press Enter. The
Results column displays the test duration.
8-14
Main Menu
Test
Network & G.703 Tests
main/test/network_G.703
Test
--------------------------------------------------------------------------------
Local Loopbacks
Network Line Loopback:
Network Repeater Loopback:
G.703 DTE Loopback:
Remote Loopbacks
Send Line Loopback: Down
Pattern Tests
Send and Monitor 511
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
ResetMon
December 2001
NETWORK & G.703 TESTS
Command
Status
Results
Start
Inactive
00:00:00
Start
Inactive
00:00:00
Start
Inactive
00:00:00
Send
Inactive
00:00:00
Stop
Active
hh:mm:ss - Errors 99999+
Model: 7976
MainMenu
Exit
7900-A2-GB21-20