Tests (Model 7974) - Paradyne 7974 User Manual

8. Testing
DSX-1 Tests (Model 7974)
To access the Network & DSX-1 Tests screen, follow this menu selection
sequence:
Use the Command column to start or stop a test. When the Status column shows
that a test is Inactive, Start is displayed; when a test is Active, Stop is displayed.
Position the cursor at the desired Start or Stop command and press Enter. The
Results column displays the test duration.
8-6
Main Menu Test Network & DSX-1 Tests
main/test/network_DSX-1
Test
--------------------------------------------------------------------------------
Local Loopbacks
Network Line Loopback:
Network Repeater Loopback:
DSX-1 DTE Loopback:
Remote Network Loopbacks
Send Line Loopback: Down
Network Pattern Tests
Send and Monitor 511
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
ResetMon
December 2001
NETWORK & DSX-1 TESTS
Command Status Results
Start Inactive 00:00:00
Start Inactive 00:00:00
Start Inactive 00:00:00
Send Inactive 00:00:00
Stop Active hh:mm:ss - Errors 99999+
Model: 7974
MainMenu Exit
7900-A2-GB21-20