Configuring The Unit Using The Internal Switches; T Overview; December 2001 - Paradyne 7974 User Manual

Configuring the Unit Using the Internal
Switches
Overview
You can make configuration changes through a VT100-compatible terminal and
the unit's Configuration menus or by manually changing switches on the board.
The unit is shipped with the switchpacks disabled to allow settings to be made
through the Configuration menus. To use the Configuration menus, refer to
Configuring the Unit Using Configuration Menus
Configuration.
7900-A2-GB21-20

December 2001

4
in Chapter 3, Initial Startup and
4-1