Using the Multi-Purpose Tray
1
Adjust the guides for the width of the media.
2
Adjust the Media Thickness switch for the media you are using (see
page 9).
3
Insert the media, printing side face-up (for Tektronix transparencies, the
logo strip is face-down ).
4
Select the media type at the front panel:
Paper
Paper 2nd Side
Transparency
Coated Paper
Card or Envelope
Label
Fabric Transfer
The printer waits a minute for you to select the media type. After
a minute, the job prints, using the previously selected media type.
5
In the Print screen (using a supported driver), select Multi-Purpose Tray.
Send the job to the printer.
Standard paper and letterhead 75 - 105 g/m
Duplex laser paper
Tektronix transparencies
Tektronix Glossy Coated paper
2
Heavy paper 109 - 150 g/m
, 29 - 40 lb.
Card stock / Index
Cover stock
Envelope
Laser labels
Tektronix Fabric Transfer media
Multi-Purpose Tray
2
, 20 - 28 lb.
1
2
3
33100-23
8