Usb - Xerox WorkCentre 7132 System Administration Manual

4 CentreWare Internet Services
4.
Set up the following option to be displayed in the frame.
• Ethernet Settings – Select the ethernet transmission format.
• MAC Address – Displays the MAC address of the machine. This is a display-
5.
Select [Apply] to reflect the new setting.
6.
Enter the user ID and password then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7.
When the reboot message appears, select [Reboot Machine].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.

USB

This page allows you to configure the USB settings for the following options.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Port Settings]
folder.
3.
Select [USB].
4.
Set up the following options to be displayed in the frame.
• Auto Eject Time – Allows you to specify the time when the paper will be
• Adobe Communication Protocol (Only available when the optional PostScript Kit
5.
Select [Apply] to reflect the new setting.
6.
Enter the user ID and password then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7.
When the reboot message appears, select [Reboot Machine].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.
52
only item.
automatically ejected from the printer if no data are sent to the printer.
is installed.)
Xerox WorkCentre 7132 System Administration Guide