Printing The System Settings List; Changing The Settings - Xerox WorkCentre 7132 System Administration Manual

2 Product Overview
• E-mail/Internet Fax Settings
• Mailbox/Stored Document Settings
• Setup Menu
• System Administrator Settings
• Login Setup/Auditron Administration
NOTE: CentreWare Internet Services is software that enables you to display,
configure and change the settings of the machine by using a browser on a computer
instead of the machine's control panel. For more information, refer to the CentreWare
Internet Service chapter of the User Guide.

Printing the System Settings List

Follow these steps to print the System Settings List:
1.
Press the <Machine Status> button on the control panel.
2.
Select the [Billing Meter/Print Report] tab.
3.
Select the [Print Report/List].
4.
Select the [Print Mode Settings].
5.
Select the [Settings List - Common Items].
6.
Press the <Start> button on the control panel.

Changing the Settings

A user ID and password are required to change the settings. The default user ID and
password for the System Administrator are "11111" and "x-admin" respectively. It
allows you to access the System Settings described in this chapter.
NOTE: You are advised to change the default password. For further assistance,
contact your Xerox Welcome Center.
Follow these steps to change the default settings:
1.
Press the <Log In/Out> button
on the control panel.
34 Xerox WorkCentre 7132 System Administration Guide
<Log In/Out>
button