Enable Xsa In Your Print Drivers; Backing Up Xsa Data And Settings And Cloning To Another Device - Xerox WorkCentre 7132 System Administration Manual

Enable XSA in your Print Drivers

Refer to the driver Help for the steps to follow to enable XSA in your print drivers.

Backing Up XSA data and settings and Cloning to another device

The Cloning feature enables you to copy XSA account information, to a file on your
workstation. You can then use this file to restore the data on the same machine or to
clone other machines. You can only clone XSA accounts to another Xerox device that
supports the XSA feature.
Check that the device you want to clone settings to supports XSA
1.
At a networked workstation, open your web browser and enter the TCP/IP
address of the machine that you want to clone to. Press [Enter].
2.
Click the [Properties] tab.
3.
See if Xerox Standard Accounting is shown in the directory tree. If it is not, you
cannot clone to this machine.
4.
Click the [Xerox Standard Accounting] folder in the directory tree.
5.
From the display of available hot links, verify that [Cloning] is among them.
To make a Back-up file
1.
At your workstation, open your web browser and enter the TCP/IP address of the
machine with the settings that you want to copy, in the Address bar. Press [Enter].
2.
Click the [Properties] tab.
3.
Click the [Xerox Standard Accounting] folder in the directory tree.
4.
Select [Cloning], and then select [Clone].
5.
Click [Save] on the dialog box that appears.
6.
A dialog box will prompt you to specify the name and location for the cloned file.
Ensure the extension reads .dat .
7.
Click [Save]. The .dat file can now be used to restore the information to the same
machine or to clone other machines.
To Restore Settings or Clone Settings to another Machine
NOTE: This procedure will cause the machine to reboot and will be unavailable over
the network for several minutes.
1.
Open your web browser and enter the TCP/IP address of the machine that you
wish to restore or clone the settings to. Press [Enter].
2.
Click the [Properties] tab.
Xerox WorkCentre 7132 System Administration Guide
Xerox Standard Accounting
173