Ethertalk; Information Checklist - Xerox WorkCentre 7132 System Administration Manual

7 EtherTalk

This chapter explains how to set up the machine to operate on an EtherTalk network.
The following information is provided.
Information Checklist – page 93
EtherTalk Environments – page 94
EtherTalk Installation – page 94
Installation Procedure – page 94
Network Communication Setup – page 94
Workstation Setup – page 95
Test Print – page 95

Information Checklist

Before installing EtherTalk on the machine, make sure that the following items are
available or have been performed.
An existing operational EtherTalk network with Macintosh workstations
equipped with Ethernet network interface cards is required. These
procedures are not designed to install an EtherTalk network.
Macintosh System versions 7.5 or later, 8.x, 9.x, or Mac OS X 10.x
Test the machine to make sure that it is installed fully and functioning
correctly.
Install the Adobe PS print driver, or PPD (optional).
If problems are encountered during the machine installation, refer to the Problem
Solving chapter for assistance.
CAUTION: Do not connect the network cable to the machine until instructed to
do so.
Xerox WorkCentre 7132 System Administration Guide
Item By
Customer
Customer
Customer
Customer
93