Tcp/Ip (Lpd Or Port9100) Environments; Tcp/Ip (Lpd Or Port9100) Installation; Installation Procedure; Tcp/Ip (Lpd Or Port9100) - Xerox WorkCentre 7132 System Administration Manual

9 TCP/IP (LPD or Port9100)

TCP/IP (LPD or Port9100) Environments

System configuration
As the machine supports the LPD and Port9100 protocol, you can print directly from a
Windows computer.
When printing from Windows 95/Windows 98/Windows Me computers through the LPD
port, use our TCP/IP Direct Print Utility. This tool is installed together with the print
drivers. When printing from Windows NT4.0/Windows 2000/Windows XP/Windows
Server 2003 computers, use the OS standard LPR port.
When printing through Port9100, change the necessary settings on the computers.
The transport protocol for LPD and Port9100 can be TCP/IP.
You will also need to set up the IP address on the machine and the Windows
computers.
NOTE: Windows NT 4.0 does not support printing through Port9100.
Target computers
The following computers support printing through LPD or Port9100.
LPD port
Port9100
NOTE: The optional PostScript Kit is required when you print from Macintosh.

TCP/IP (LPD or Port9100) Installation

This section describes how to set up the machine to use the LPD and Port9100
protocol.

Installation Procedure

There are three stages to enable printing to the machine through LPD or Port9100.
104
Connection
Windows 95
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Mac OS X 10.x
Windows 2000
Windows XP
Windows Server 2003
OS
Xerox WorkCentre 7132 System Administration Guide
Protocol
TCP/IP
TCP/IP