Xerox WorkCentre 7132 System Administration Manual page 27

• Software Version – Displays the [Software Version] screen. You can identify the
software versions of the components of the machine.
Paper Tray
This feature allows you to check the status of each paper tray, including the bypass tray
and the optional Tandem Tray Module. It also displays the size, type, and remaining
amount of media in each tray.
1.
Select [Paper Tray] on the
[Machine Status] screen.
Overwrite Hard Disk
This feature displays the overwriting status of the hard disk.
NOTE: This option is displayed if the feature is enabled in the System Settings by the
Key Operator.
1.
Select [Overwrite Hard Disk] on
the [Machine Status] screen.
Print Mode
This feature allows you to change the default printer mode and emulation parameter
settings.
For the lists of emulation parameters and their values, refer to Emulation Parameters
in the Print chapter of the User Guide.
1.
Select [Print Mode] on the
[Machine Status] screen.
2.
Select the required option.
• Off-line – Takes the printer off-line. The printer is unavailable in this mode.
• On-line – Puts the printer on-line, ready to accept data.
• PCL Emulation – Allows you to set parameter values for PCL emulation to print
documents. For a list of parameters, refer to the User Guide.
• HP-GL/2 Emulation – Allows you to set parameter values for HP-GL/2 emulation to
print documents. It also allows you to store, retrieve, and delete up to 20 emulation
settings.
– Retrieve Programming – Retrieves emulation settings and makes them active.
Xerox WorkCentre 7132 System Administration Guide
Modes
27