Ssdp; Ldap - Xerox WorkCentre 7132 System Administration Manual

7.
When the reboot message appears, select [Reboot Machine].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.

SSDP

This page allows you to configure the SSDP settings for the following options.
NOTE: SSDP is available only after UPnP is enabled.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3.
Select [SSDP].
4.
Set up the following option to be displayed in the frame.
• Valid Advertising Period – Specify the time during which the advertising period
• Maximum TTL – Specify the maximum TTL (time to live).
5.
Select [Apply] to reflect the new setting.
6.
Enter the user ID and password, then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7.
When the reboot message appears, select [Reboot Machine].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.

LDAP

This page allows you to configure the LDAP settings for the following options.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3.
Select [LDAP].
Xerox WorkCentre 7132 System Administration Guide
Using CentreWare Internet Services to Configure Settings on the Machine
remains valid.
63