Network Communication Setup - Xerox WorkCentre 7132 System Administration Manual

Print copy scan fax email
Hide thumbs Also See for WorkCentre 7132:
Table of Contents

Advertisement

Network Communication Setup

Use this procedure to set up the network communication parameters of the machine.
NOTE: Keep the SNMP port enabled while you use the machine on the TCP/IP
network.
NOTE: Some of the configuration options for this protocol are only available from the
CentreWare Internet Services. Refer to the CentreWare Internet Services chapter of
the User Guide.
Follow the steps below to establish TCP/IP.
1.
Connect the machine to the network.
2.
Display the [System Settings] screen.
NOTE: For more information about how to display the [System Settings] screen, refer
to the Setups chapter of the User Guide.
3.
Select [Network Settings].
4.
Select [Protocol Settings].
5.
Select [TCP/IP - Get IP Address] and [Change Settings].
6.
Select a method for establishing an IP address from [DHCP], [BOOTP], [RARP],
[DHCP/Autonet], or [Manual], and then select [Save].
NOTE: Use the DHCP server together with the Windows Internet Name Server
(WINS) server.
If you selected [Manual] in step 6, then complete steps 7 to 12 to enter the [Protocol
Settings]. Otherwise, complete step 15.
7.
Select [TCP/IP - IP Address], and then [Change Settings].
8.
Use the keypad on the screen to enter the IP Address for the machine in the
format "XXX.XXX.XXX.XXX". Enter relevant values (0 to 255) into the highlighted
field and select [Next]. The next 3 digits are highlighted. When you have finished
entering all values, select [Save].
9.
Select [TCP/IP - Subnet Mask], and then [Change Settings].
10.
Using the same method as in step 8, enter the Subnet Mask.
11.
Select [TCP/IP - Gateway Address], and then [Change Settings].
12.
Using the same method as in step 8, enter the Gateway Address.
NOTE: If you do not wish to set the Gateway Address, enter "0.0.0.0".
13.
Select [TCP/IP - IP Filter], then [Change Settings].
14.
Select [On] to filter access to the machine.
NOTE: If you do not wish to use the IP filter feature, select [Off].
Xerox WorkCentre 7132 System Administration Guide
UNIX TCP/IP Installation
75

Advertisement

Table of Contents
loading

Table of Contents