Port9100; E-Mail - Xerox WorkCentre 7132 System Administration Manual

Port9100

This page allows you to configure the Port9100 settings for the following options.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3.
Select [Port9100].
4.
Set up the following options to be displayed in the frame.
• Port Number – Allows you to configure the port number.
• TBCP Filter (Only available when the optional PostScript Kit is installed.)
• Connection Time-Out – Allows you to specify the connection time-out period
5.
Select [Apply] to reflect the new setting.
6.
Enter the user ID and password then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7.
When the reboot message appears, select [Reboot Machine].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.

E-mail

This page allows you to configure the E-mail and iFax (Internet Fax) settings for the
following options.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3.
Select [E-mail].
4.
Set up the following options to be displayed in the frame.
Xerox WorkCentre 7132 System Administration Guide
Using CentreWare Internet Services to Configure Settings on the Machine
when transmission fails.
59