Table of Contents
Advertisement
mm CHAPTER 3 MECHANICAL SYSTEM
Vi.
INK
BOTTLE
CASE
5) Disconnect the four tubes
© from the printer
body and the connector ©.
. Removing the Ink Bottle Case
1) Move the carriage to the center and tum off the
power.
2) Remove the head joint © from the cartridge
and insert the head joint in the joint stand.
3) Open the tube cock @ and retum the ink in the
tube to the buffer section.
Figure 3-603
CAUTION
When connecting the tubes, make sure
that the tube with green tape connect the
uppermost joint (Bk) on the ink bottle case.
6) Insert the parallel pins @ to the end of ink
4)
Remove the mounting screw @) and remove
the tube cover @.
Figure 3-604
Figure 3-602
COPYRIGHT © 1998 CANON INC.
3-44
Advertisement
Table of Contents
