Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. BJC S600
  6. Setup instructions

Canon BJC-S600 Setup Instructions

S600 series color bubble jet printer
Hide thumbs Also See for BJC-S600:

Advertisement

Quick Links

Download this manual See also: User Manual
S600 Setup Instructions
Step 1: Unpack The Printer
1. Carefully remove all items from the box.
Step 2: Prepare the Printer
1. Remove the orange shipping tape from the front and sides of the printer.
2. Plug the power cord into the back of the printer and connect the other end to a
power outlet.

Advertisement

loading

Related Manuals for Canon BJC-S600

Summary of Contents for Canon BJC-S600

  • Page 1 1. Carefully remove all items from the box. Step 2: Prepare the Printer 1. Remove the orange shipping tape from the front and sides of the printer. 2. Plug the power cord into the back of the printer and connect the other end to a power outlet.

  • Page 2: Step 3: Install The Printhead

    3. Press the POWER button. 4. Open the front cover. The printhead holder automatically moves to the center. Remove the protective orange tape. 5. Write down the serial number located to the right of the printhead. You will need this later to register the product. Step 3: Install the Printhead 1.

  • Page 3: Step 4: Install The Ink Tanks

    NOTE: Do not touch the electrical contacts. 3. Raise the gray lock lever. 4. Gently slide the printhead into the holder. The printhead will rest at a slight angle. Do not press it down. Lower the lock lever and gently press it down until it locks into place. Step 4: Install the Ink Tanks 1.
  • Page 4 2. Twist off and discard the orange protective cap. NOTE: To avoid spilling ink, never press on the sides of an ink tank. 3. Insert the ink tank into the correct slot. (Refer to the color guide on the printhead.) Press down gently until the ink tank lock into place.

  • Page 5: Section 5: Connect The Printer To Your Computer

    IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 2. Connect one end of the USB cable to the computer, the other end to the printer. For Parallel Cables 1.
  • Page 6 Step 6: Install the Printer Driver - Choose Installation A(Windows®) B(Macintosh®) Installation A: Windows® 1. Be sure printer is off before continuing NOTE: For Windows 2000 or Windows NT 4.0, log on to Windows as an Administrator before continuing. IMPORTANT: If you see this screen, click Cancel and continue.
  • Page 7 NOTE: If you are prompted to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, insert the CD-ROM and continue. 6. Click Start. (If the Printer Driver button is not red, select Printer Driver, then click Start.) The printer driver will start loading automatically.
  • Page 8 Exit. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead. 10. Continue with step 7 Align the Installation B: Macintosh®...

  • Page 9: Step 7: Align The Printhead

    7. After the computer restarts, select the Apple menu, then Chooser. 8. Click the S600 icon in the Chooser. The printer name will highlight and move to the right panel.
  • Page 10 2. Start the alignment procedure. Windows: a. Click Start, then Settings, then Printers. b. Right-click the Canon S600 icon, then click Properties. c. Click the Maintenance tab, then click the Print Head Alignment icon. d. When asked to start printhead alignment, click OK .

This manual is also suitable for:

Color bubble jet s600