4
Route the cable through the flatbed assembly, and remove it from the flatbed assembly.
USB cable removal
1
Remove the right cover. See
2
Remove the controller board shield. See
3
Remove the fan.
4
Disconnect the MFP wireless cable from the RIP board.
5
Remove the scanner front cover. See
6
Remove the control panel assembly. See
7
Remove the UICC drip pan.
8
Remove the USB cable bracket. See
"Right cover removal" on page
"Controller board shield removal" on page
"Scanner front cover removal" on page
"Control panel assembly removal" on page
"USB cable bracket removal" on page
Repair information
369
277.
361.
304.
7016
284.
298.