Front Door Assembly Restraint Cable Removal - Lexmark C520 Series Service Manual

5022-xxx

Front door assembly restraint cable removal

1.
Remove front access cover assembly. See
2.
For either right or left, release cable spring (A) from front door assembly.
3.
For right cable, remove four screws (B) and gearbox/switch shield (C). There is a locking tab on the back of
the gearbox shield.
4.
For left and right cables, remove end of cable (D) from frame.
Note: The shortest cable installs on the right side of the printer.
4-36
Service Manual
"Front access cover assembly removal" on page 4-19.