Lexmark MX61 Series Service Manual page 82

Error code Description
232.03 Input sensor never detected sheet from internal
duplex path.
232.10 Feed error picking from the duplexer.
Duplex service check
Action
Step 1
a
Remove the rear cover.
b
Check the redrive rollers for wear or damage.
Are they free of wear or damage?
Step 2
a
Remove the left cover. See
264.
b
POR into the Diagnostics menu and navigate to:
DUPLEX TESTS > Duplex Feed 1
c
Check the reverse solenoid for proper operation.
Does it function properly?
Step 3
a
Remove the input tray.
b
From under the printer, check the duplex gear assembly and
duplex link for wear and damage.
Are the they free of wear and damage?
Step 4
From under the printer, check the duplex, belt, and roller for wear
and damage.
Are they free of wear and damage?
Step 5
a
POR into the Diagnostics menu and navigate to:
DUPLEX TESTS > Sensor Test
b
Lower the jam access cover, and toggle the duplex sensor.
Does the sensor state on the control panel change when it is
toggled?
Step 6
Does the error remain?
"Left cover removal" on page
Diagnostic information
82
Action
Go to "Duplex service check" on page
Go to "Duplex service check" on page
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
Go to step 6.
Contact the next
level of support.
7016
82.
82.
No
Replace the redrive
assembly. See
"Redrive assembly
removal" on
page 343.
Replace the reverse
solenoid. See
"Reverse solenoid
removal" on
page 273.
Replace the duplex
gear assembly. See
"Duplex gear
assembly removal"
on page 275.
Replace the duplex.
See "Duplex
removal" on
page 324.
Replace the duplex
sensor. See "Duplex
sensor and input
sensor removal" on
page 325.
The problem is
solved.