Front Door Not Closed Service Check - Lexmark MX61 Series Service Manual

Action
Step 6
Try a different USB cable.
Did this fix the issue?
Step 7
Replace the controller board. Go to
on page 282.
Did this fix the issue?

Front door not closed service check

Action
Step 1
Open the front access cover, and then check the interlock switch
actuator.
Is the actuator damaged?
Step 2
Replace the front access cover. See
on page 316.
Did this resolve the issue?
Step 3
Check the switch on the front cover for dirt or debris that might
keep the switch trigger from properly moving.
Is there dirt or debris?
Step 4
Remove the debris.
Did this resolve the issue?
"Controller board removal"
A
"Front access cover removal"
Diagnostic information
191
Yes No
The problem is Go to step 7.
solved.
The problem is Contact the next
solved. level support
Yes No
Go to step 2. Go to step 3.
The problem is Go to step 3.
solved.
Go to step 4. Go to step 5.
The problem is Go to step 5.
solved.
7016