Adf Unit Removal; Adf Cable Removal; Usb Cable Removal - Lexmark MX310 Series Service Manual

ADF cable removal

1
Remove the ADF unit. See
2
Using a flat-blade screwdriver, remove the cable cover from the rear of the scanner assembly.
3
Remove the scanner assembly from the MFP.
4
Route the cable through the flatbed assembly, and remove it from the flatbed assembly.

USB cable removal

1
Remove the right cover. See
2
Remove the RIP board shield. See
3
Remove the fan.
4
Disconnect the MFP wireless cable from the RIP board.
"ADF unit removal" on page
"Right cover removal" on page
"Controller board shield removal" on page
Repair information
316.
226.
325
234.
7015