Front Door Sensor Removal; Front Input Guide Removal - Lexmark MX61 Series Service Manual

Front door sensor removal

1
Remove the front access cover. See
2
From under the right mount, remove the screw (A).
Note: Use a #1 Phillips screwdriver.

Front input guide removal

1
Remove the right cover. See
2
Remove the MPF pick roller cover. See
3
Remove the MPF pick roller. See
4
Remove the jam access cover. See
5
Remove the MPF tray. See
6
Disconnect cable JMPF1 from the controller board.
"Front access cover removal" on page
"Right cover removal" on page
"MPF pick roller cover removal" on page
"MPF pick roller removal" on page
"Jam access cover removal" on page
"MPF tray removal" on page
Repair information
318
316.
277.
314.
315.
311.
7016
314.