2000-sheet dual input (TTM)-tray 3 rear cable assembly removal
1.
2.
page
4-55.
3.
page
4-56.
4.
Remove the E-clip with a prying tool securing the front lift cable pulley (A) to the tray lift shaft assembly (B).
5.
Gently move the tray lift shaft assembly (B) toward the rear of the tray and detach the rear bushing (C) from
the frame.
Note: Do not remove the front lift cable pulley (A) or the front lift cables will become detached.
6.
Move the rear portion of the tray lift shaft assembly (B) away from the frame.
"2000-sheet dual input (TTM)-tray 3 front cover removal" on
4024-110
4-50.
4-57
Repair information