Stapler Top Cover Removal - Lexmark MX61 Series Service Manual

5
Squeeze the latches to release, and dislodge the interface cable from its slot.
6
Route the cable off the stapler, and remove.
Note: Pay attention to the original routing of the cable.

Stapler top cover removal

1
Remove the right cover. See
2
Remove the left cover. See
3
Remove the rear cover. See
4
Remove the stapler cooling fan. See
5
Remove the stapler power supply unit. See
"Stapler right cover removal" on page
"Stapler left cover removal" on page
"Stapler rear cover removal" on page
"Stapler cooling fan removal" on page
"Stapler power supply unit removal" on page
Repair information
405
384.
385.
393.
401.
7016
401.