Power Supply Module; General Specifications - Delta AH Motion Series Hardware Manual

3.4 Power Supply Module

3.4.1 General Specifications

 AHPS05-5A
Supply voltage 100~240 VAC (-15%~10%), 50/60 Hz±5%
Action If the input power supply is larger than 85 VAC, the power supply module can function
specifications
normally.
Allowable
If the instantaneous power failure time is within ten milliseconds, the power supply module
instantaneous
keeps running.
power failure time
Fuse 4 A/250 VAC
Inrush current
45 A within 1 millisecond at 115 VAC
The maximum current is 2.5 A.
24 VDC output
It is only for a backplane.
Power protection The 24 VDC output is equipped with the short circuit protection and the overcurrent protection.
Surge voltage
1,500 VAC (Primary-secondary), 1,500 VAC (Primary-PE), 500 VAC (Secondary-PE)
withstand level
Above 5 MΩ
Insulation voltage
(The voltage between all inputs/outputs and the ground is 500 VDC.)
The diameter of the ground should not be less than the diameters of the cables connected to
Ground
the terminals L and N.
 AHPS15-5A
Supply voltage
24 VDC (-35%, +30%)
Allowable
instantaneous 10 milliseconds
power failure time
Fuse 6.3 A/250 VAC
Inrush current
30 A within 100 milliseconds
24 VDC output 1.5 A
Maximum output
36 W
power
The 24 VDC output is equipped with the short circuit protection, the overcurrent protection,
Power protection
and the overvoltage protection.
Surge voltage
500 VAC
withstand level
Ground The diameter of the ground should be greater than 1.6 mm
Ch a pt er 3 Pr o duc t S pec if ic a t io ns
Specifications
Specifications
2
.
3_
3 - 2 1