Basic Procedures for Saving Scan Files on a
USB Flash Memory Device
This section explains basic operations of Scan to USB. Files are saved to the USB flash memory device
inserted into the machine.
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
• This machine does not support the use of external USB hubs.
• Not all types of USB flash memory devices are supported.
• When using Scan to USB, set [Save Scn Data to USB] to [Active]. For details, see page 241
"Administrator Tools Settings".
1.
Insert the USB flash memory device into the USB port.
2.
Press the [Home] key.
3.
Press the [Scanner] icon on the [Home] screen.
4.
Press the [USB] tab.
5.
Place the original on the exposure glass or in the ADF.
To place the original, see page 76 "Placing Originals".
Basic Procedures for Saving Scan Files on a USB Flash Memory Device
DYH234
143