Specifying Scan Settings For Faxing - Ricoh 132 MF User Manual

6. Sending and Receiving a Fax
7. If you hear a high pitched tone, press the [Start] key.
If [TX/RX Switch Setting] is set to [TX/RX Auto Setting], Step 8 does not apply.
8. If the original is placed on the exposure glass, press [TX], and then press the [Start] key.
9. Replace the handset.

Specifying Scan Settings for Faxing

Adjusting image density
This section describes how to adjust image density for the current job.
There are three image density levels. The darker the density level, the darker the printout.
1. Press the [Home] key.
2. Press the [Fax] icon on the [Home] screen.
3. Press [TX Settings].
4. Press [ ] or [ ] to select the desired density level, and then press [OK].
• You can change the machine's default [Density] setting to always scan with a specific density level.
For [Density], see page 217 "Fax Features Settings".
184