Connecting The Machine To A Wireless Network; Using The Wi-Fi Setup Wizard - Ricoh 132 MF User Manual

11. Configuring Network Settings

Connecting the Machine to a Wireless Network

• To use wireless network, the wireless LAN option needs to be installed to the machine.
There are four methods for connecting the machine to a wireless network:

• Using the Wi-Fi Setup Wizard

See page 380 "Using the Wi-Fi Setup Wizard".
• Using the WPS button
See page 381 "Using the WPS Button".
• Using a PIN code
See page 383 "Using a PIN Code".
Using the Wi-Fi Setup Wizard
A router (access point) is needed to set up a connection.
Checking the SSID and encryption key
The SSID and Encryption key for the router (access point) may be printed on a label affixed to the
router (access point). For details about the SSID and Encryption key, refer to the router (access
point) manual.
Configuring settings using the control panel
Make sure the Ethernet cable is not connected to the machine.
1. Check that the router (access point) is working correctly.
2. Make sure the wireless LAN option is attached to the machine and the wireless (Wi-Fi)
connection is enabled.
3. Press the [Home] key.
4. Press the Wireless (Wi-Fi) icon on the [Home] screen.
380