Table of Contents
Advertisement
Specifying Paper Type and Paper Size Using
Smart Organizing Monitor
• For details about acquiring Smart Organizing Monitor, see Setup Guide.
The procedure in this section is an example based on Windows 10. The actual procedure may vary
depending on the operating system you are using.
1.
On the [Start] menu, open the pull-down list next to [132 P_132 MF_Series Software
Utilities].
2.
Click [Smart Organizing Monitor for 132 P_132 MF_Series].
Smart Organizing Monitor starts.
3.
If the machine you are using is not selected, click [Connect Printer], and then do one of the
following:
• Select the machine's model.
• Enter the IP address of the machine manually.
• Click [Search Network Printer] to search the machine via the network.
4.
Click [OK].
5.
On the [User Tools] tab, click [Printer Configuration].
If you are requested to enter an access code, enter the access code and then click [OK].
The default access code is "Admin".
6.
On the [Paper Input] tab, select the paper type and paper size, and then click [OK].
7.
Click [Close].
Specifying Paper Type and Paper Size Using Smart Organizing Monitor
M0ESOC8112
55
Advertisement
Table of Contents
Troubleshooting
