Table of Contents
Advertisement
6. Sending and Receiving a Fax
• If you cancel sending a fax while broadcasting, only the fax to the current destination is canceled.
The fax will be sent to the subsequent destinations as normal. For details about sending a fax using
the broadcast function, see page 178 "Specifying the Fax Destination".
Canceling a transmission after the original is scanned (before a transmission starts)
Use this procedure to delete a file stored in memory before its transmission starts.
Use the following procedure to delete a file stored in memory (such as automatic redial) before its
transmission starts.
1.
Confirm that the initial screen for Fax mode is shown on the display.
For details about the initial screen, see page 165 "Fax Mode Screen".
2.
Press [Tx File].
3.
Select the file you want to delete.
• To delete a file
Select the file you want to delete, and then press [Delete]. Press [Yes] when the message
appears.
• To delete all files
Press [Delete All]. Press [Yes] when the message appears.
• You cannot view files that are in the process of being sent.
• If you specify a broadcast task, all the unsent destinations are canceled.
Specifying the Fax Destination
Other than entering the destination fax number using the number keys, you can specify destinations
using the following functions:
• Quick Dial
• Speed Dial
• Broadcast function
• Redial function
178
Advertisement
Table of Contents
Troubleshooting
