Wireless Tab - Ricoh 132 MF User Manual

8. Configuring the Machine Using Utilities
Item
POP Server: E-mail
Reception Setting
POP Interval (minutes)

Wireless Tab

Wireless LAN Status
Item
Wireless LAN Status
MAC Address
Communication Mode
SSID
Wireless Signal Status
Wireless
Wireless LAN Settings
Item
SSID
Communication Mode
292
Select whether to leave or delete e-mails in the POP3 server after receiving
them.
[No]: Delete e-mails from the server after receiving them.
[Save E-mail]: Leave e-mails on the server after receiving them.
[Save Only Error Info]: Delete e-mails that are successfully received from
the server only.
Specifies how many minutes the machine waits between automatic
connections to the POP3 server to acquire new e-mails (2 to 1440
minutes).
Displays the status of the connection to the wireless LAN.
Displays the MAC address.
Displays the communication mode that the machine is connecting in.
Displays the SSID of the access point that the machine is connected to.
Displays the strength of the wireless signal that is being received.
Specifies whether or not to use the wireless LAN. This item appears when
the wireless LAN option is installed on the machine.
Enter the SSID of the access point.
The SSID can contain up to 32 characters.
When you click [Scan List], a list of available access points is displayed.
You can select the SSID from the list.
[Infrastructure] is selected by default. Therefore, connect the machine to a
wireless router or access point.
Description
Description
Description