Ricoh 132 MF User Manual page 329

Message
Cannot copy. Combined copying could not be
performed because the originals
Set original to ADF.
were not placed in the ADF.
Check Paper Size The paper size set for the
document differs from the size of
the paper in the indicated tray.
Check Paper Type The paper type set for the
document differs from the type
of the paper in the indicated
tray.
Connection Failed The line could not be connected
correctly.
Cooling down... If the internal parts of the
machine get hot while doing
continuous printing, a message
appears and printing stops.
Cover open A cover is open.
Causes
• Use the ADF, even when copying a
• If you need to use the exposure glass,
Press [Form Feed] to begin printing, or
press [Job Reset] to cancel the job.
Press [Form Feed] to begin printing, or
press [Job Reset] to cancel the job.
• Confirm that the telephone line is
• Disconnect the telephone line from
Wait until the machine cools down and
resumes printing.
Close the cover completely.
Error and Status Messages on the Screen
Solutions
single sheet.
select [Off] or [Manual 2Sd Scan
Mode] in [Duplex/Combine] under
[Copier Features], and then try again.
See page 209 "Copier Features
Settings".
properly connected to the machine.
the machine, and connect a standard
telephone in its place. Confirm that
you can make calls using the
telephone. If you cannot make calls
this way, contact your telephone
company.
327