Attaching The Tab Fence In Trays 1, 2, And The Wide Large Capacity Tray - Ricoh Pro C9500 Operator's Manual

10. Tighten the screw on the arm holding the side fence in place.
11. Carefully push the paper tray fully in until it clicks.
• Various sizes of paper can be loaded in the wide LCT by adjusting the positions of fences.
• When you are changing the paper size, see page 147 "Changing Tray Paper Settings".
• You can load envelopes in the wide LCT. When loading envelopes, place them in the correct
orientation. For details, see below.
• page 121 "Envelope Orientation and Recommended Status"
• When you are using a special printing feature such as banner printing, cover page, and separation
sheets, the indicator on the front side of the tray remains lit until printing is completed. You cannot
reload paper while the indicator remains lit.

Attaching the Tab Fence in Trays 1, 2, and the Wide Large Capacity Tray

When loading tab stock, attach the tab fence.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
M0EDIM0134
M0EDIM0109
Loading Paper into the Paper Tray
77