Installing The Ln2600 Rugged Security Router; Before You Install The Ln2600 Router - Juniper LN2600 Hardware Manual

CHAPTER 3
Installing the LN2600 Rugged Security
Router

Before You Install the LN2600 Router

Copyright © 2015, Juniper Networks, Inc.
Before You Install the LN2600 Router on page 13
Installing the LN2600 Router Overview on page 14
Mounting the LN2600 Router on the Rack on page 14
Mounting the LN2600 Router on the Wall on page 18
Removing the LN2600 Router on page 21
Powering on the LN2600 Router on page 22
Installing the SFP Transceiver in the LN2600 Router on page 27
Removing the SFP Transceiver from the LN2600 Router on page 29
Weatherproofing the LN2600 Router on page 30
Configuring and Operating the Router on page 35
Before installing the LN2600 router, be sure you have:
A 3/32 Allen wrench with a torque of 5 lb-in (0.56 Nm).
Phillips (+) screwdriver with a minimum shaft length of 6 inches (150 mm)
2.5-mm slotted screwdriver
T10 Torx and 7 mm nut driver
3/8-in ratchet driver
Copper or fiber-optic Ethernet cables (up to eight for each router)
SFP and the RJ-45 Console cables
An electrostatic discharge (ESD) grounding strap
Power supply of -48 VDC
Rack-mounting and the wall-mounting kits (optional)
13