List of monitor data that can be used
The specifications are the same as for the servo amplifier axis. For the detailed specifications, refer to "MAJOR
POSITIONING CONTROL" in the following manual.
MELSEC iQ-R Motion Module User's Manual (Application for Simple Motion Mode)
: Available, : Not available
■System monitor data
Name
[Md.3] Start information
Start history
[Md.4] Start No.
[Md.54] Start (Year: month)
[Md.5] Start (Day: hour)
[Md.6] Start (Minute: second)
[Md.60] Start (ms)
[Md.7] Error judgment
[Md.8] Start history pointer
[Md.19] Number of write accesses to flash ROM
[Md.50] Forced stop input
[Md.59] Module information
[Md.130] F/W version
[Md.131] Digital oscilloscope running flag
[Md.132] Operation cycle setting
[Md.133] Operation cycle over flag
[Md.134] Operation time
[Md.135] Maximum operation time
Servo amplifier axis
: Servo amplifier axis and command generation axis in common
: Servo amplifier axis and command generation axis in common
: Servo amplifier axis and command generation axis in common
: Servo amplifier axis and command generation axis in common
: Servo amplifier axis and command generation axis in common
: Servo amplifier axis and command generation axis in common
: Servo amplifier axis and command generation axis in common
: Servo amplifier axis and command generation axis in common
Command generation axis
2 INPUT AXIS MODULE
2.2 Command Generation Axis
2
47