Zte H1600 Maintenance Management Manual page 11

RF Exposure Information
The Maximum Permissible Exposure (MPE) level is calculated based on a distance of
d=20 cm between the device and the human body. To maintain compliance with the RF
exposure requirement, a separation distance of 20 cm between the device and the hu-
man should be maintained.
RF frequency bands:
Frequency band
2.4GHz Band: 2414--2472 MHz
5GHz Band: 5150--5350 MHz
5GHz Band: 5450--5725 MHz
EU Declaration of Conformity
Hereby, ZTE Corporation declares that the radio equipment type ZTE H1600 is in com-
pliance with Directive 2014/53/EU, The full text of the EU declaration of conformity is
available at the following Internet address:
http://support.zte.com.cn/support/cer/EU
Environmental Information
The equipment you purchased has required the extraction and use of natural resources
for its production.The equipment and its electrical components comply with restrictions
on the use of some hazardous substances in electrical and electronic equipment in ac-
cordance with RoHS and REACH when the device is imported into the EU. To avoid
putting such substances into our environment and to reduce pressure on our natural re-
sources, we ask that you reuse or recycle your end-of-life equipment by using an ac-
credited electronics take-back system.
The symbols below indicate that this product should be reused or recycled and not sim-
ply discarded. Please locate and use an appropriate reuse and recycling site.
If you need more information on collection, reuse and recycling systems, contact your lo-
cal or regional waste administration. You may also contact your equipment provider for
more information on the environmental performances of these products.
SJ-20210621164956-008 | 2022-09-01(R1.3)
Maximum Output Power
EIRP < 20 dBm
EIRP < 23 dBm
EIRP < 30 dBm
1 Safety Precautions
3