Zte H1600 Maintenance Management Manual page 36

ZTE H1600 Maintenance Management Guide
Parameter
IP Version
*Authentication Type
*Connection Mode
*PPPoE Pass-through
NAT
IPv4
IP Type
IP Address
Subnet Mask
Gateway
DNS1-DNS3
IPv6
IPv6 Info Acquire
Mode
Request PD
Unnumbered Mode
28
Description
They are provided by the ISP.
The IP version includes: IPv4, IPv6 and IPv4/v6
In this case, IPv4 is selected.
There are three authentication types:
⚫
Auto
⚫
PAP
⚫
CHAP
There are two connection modes:
⚫
Always On
⚫
On Demand
Enable or disable the PPPoE Pass-through function.The default configu-
ration is on.
Enable or disable the NAT function.
By default, it is set to DHCP. Options:
⚫
DHCP: The DHCP server automatically allocates a dynamic IP ad-
dress to the device.
⚫
Static: You need to specify a static IP address for the device.
WAN IP Address of ZTE H1600.
WAN subnet mask of ZTE H1600.
The IP address of the upstream gateway device connected to the ZTE
H1600.
IP address of the DNS server for static connections. You can set up to
three IP addresses for the server. These IP addresses are provided by
the ISP.
Specifies how to acquire IPv6 information for the WAN connection. It is
valid only if the WAN connection supports IPv6.
The options are:
⚫
Manual :You need to set the global address, gateway, and DNS ac-
quisition modes.
⚫
Auto :The global address, gateway, and DNS acquisition modes are
automatically configured.
By default, the On button is selected.
By default, the On button is not selected. If it is selected,
Specifies how to acquire the global IPv6 address.
SJ-20210621164956-008 | 2022-09-01(R1.3)