Configure The Band Steering; Configure The Ssid Isolation - Zte H1600 Maintenance Management Manual

ZTE H1600 Maintenance Management Guide

5.2.3 Configure the Band Steering

The procedure provides the parameters of Band Steering configuration features. Band
Steering is used for switching between radio 2.4GHz and radio 5GHz .
Steps
1. On the main page of the ZTE H1600, select Local Network > WiFi > WiFi Band
Steering to open the WiFi Band Steering page, see
Figure 5-13 WiFi Band Steering Configuration Page
Table 5-6
Table 5-6 Parameter Descriptions for the Band Steering
Parameter
Band Steering Enable
2. Click Apply button to apply the changes.

5.2.4 Configure the SSID Isolation

Sets whether to enable SSID Isolation for WiFi networks.If SSID isolation function is en-
abled, the wireless clients with the different SSID can not access each other.
Steps
1. On the main page of the ZTE H1600, select Local Network > WiFi > WiFi SSID Iso-
lation to open the WiFi SSID Isolation page, see
56
lists the Band Steering parameters.
Description
Click on to enable the radio handover function.Depending on the dis-
tance and signal strength, handover will occur between the 5GHz net-
work and the 2.4GHz network.
Figure 5-13.
Figure 5-14.
SJ-20210621164956-008 | 2022-09-01(R1.3)