Table of Contents
Advertisement
Parameter
GUA Allowed From
GUA
Gateway
PD
DNS1–DNS3
VLAN
*802.1p
VLAN ID
*When you click the Detail button in the upper right corner of the page, more para-
meters appear.
2. Click Apply button to apply the changes.
4.2.3 Configure the LTE
A dongle device can be connected to ZTE H1600 through a USB interface. If the Dongle
has a LTE(SIM) card inserted, the ZTE H1600 can access the Internet through the don-
gle device.
This page provides the parameters of the LTE connection configuration function.
Note
What to do when LTE device is not ready?
SJ-20210621164956-008 | 2022-09-01(R1.3)
Description
Specifies how to acquire the global IPv6 address. It is valid only when
the IPv6 Info Get Mode parameter is set to be Manual Mode. Options:
⚫
DHCPv6: The device acquires a global address through DHCPv6. If
no option is selected, it indicates that no address acquisition mode is
configured.
⚫
PD: You need to set a static IPv6 address.
⚫
SLAAC: The device generates a global address in accordance with
the RA packets from the upper-layer server.
Mode of obtaining global address.
The IP address of the upstream gateway device connected to the ZTE
H1600.
Prefix delegation.
IPv6 address of the DNS server for static connections. You can set up to
three IPv6 addresses for the server. These IPv6 addresses are provided
by the ISP.
Specifies whether to carry a VLAN tag in the packets sent over the WAN
connection. By default, On button is not selected. If it is selected, a
VLAN tag is carried in the packets sent over the WAN connection, and
the VLAN ID must be set.
Specify the 802.1p value to modify the service priority.The default con-
figuration is 0,and it supports 1-7.
Identifies a VLAN. Range: 0–4094. To ensure normal service operation,
the VLAN ID must be the same as that set in upper-layer MDU/DSLAM
configuration.
4 Configure the Internet
29
Hide quick links:
Advertisement
Table of Contents
