Configure The Port Forwarding - Zte H1600 Maintenance Management Manual

ZTE H1600 Maintenance Management Guide
Parameter
LAN Host
2. Click Apply button to apply the changes.

4.4.4 Configure the Port Forwarding

This procedure introduces how to configure Port Forwarding so that a computer from
the external network can access the LAN-side server through the WAN connection. Port
Forwarding provides the parameters of Port Forwarding configuration features.
If you have local servers for different services and you want to make them publicly ac-
cessible, you need to specify the port forwarding policy. With
the internal IP addresses of these servers to a single IP address that is unique on the In-
ternet.
To the Internet users, all virtual servers on your LAN have the same IP Address. This IP
Address is allocated by your ISP. This address should be static, rather than dynamic, to
make it easier for Internet users to connect to your servers. However, you can use dy-
namic DNS
stead of an IP address.
Steps
1. On the main page of the ZTE H1600, select Internet > Security > Port Forwarding
to open the Port Forwarding page, the page see
Figure 4-21 Port Forwarding Configuration Page
2. Configure the Port Forwarding parameters.
40
Description
The IP address or the MAC address of the computer at the LAN
side.
feature to allow users to connect to your virtual servers by using a URL, in-
NAT
Figure 4-21.
SJ-20210621164956-008 | 2022-09-01(R1.3)
applied, it translates