Zte H1600 Maintenance Management Manual page 63

Table 5-4 Access Control-Mode configuration parameters
Parameter
No Filter
Black List
White List
4. Click Apply button to apply the changes.
Configure the Access Control-Rule
1. Click Access Control-Rule Configuration to open the configuration page, see
ure 5-12.
Figure 5-12 Access Control-Rule Settings
2. Configure the access control-rule configuration
control-rule configuration parameters.
Table 5-5 Access Control-Rule Configuration parameters
Parameter
Name
SSID
MAC Address
3. Click Apply button to apply the changes.
SJ-20210621164956-008 | 2022-09-01(R1.3)
Description
No filter is to be applied (the default).
Deny the WiFi network users to access specific address.
Allow the WiFi network users to access specific address.
parameters.Table 5-5
Description
The name of Access control item.
The SSID corresponding to the WiFi network to which the
rule is applied, the default value is SSID1.
The MAC address of the wireless device.
We suggest to set the MAC addresses in access control list
using a wireline connected device.
Modifying the list using a wireless device may cause unex-
pected disconnection of the device used
5 Configure the Local Network
lists the access
Fig-
55