Zte H1600 Maintenance Management Manual page 38

ZTE H1600 Maintenance Management Guide
1. Check whether the dongle is plugged in.
2. If the device is already plugged in, please check whether the USB is contacted well.
3. If the device is still unrecognized, maybe it has been damaged. Please replace the
device.
Steps
1. Insert LTE device.
2. On the main page of the ZTE H1600, select Internet > WAN > Mobile Backup >
Mobile Backup Connection to open the Mobile Backup Connection page, see
Figure
Figure 4-10 New Mobile Backup Connection
3. Set the parameters, for a description of the parameters, refer to
Table 4-3 New LTE Connection parameters
Parameter
Connection Name
PDP Type
APN
30
4-10.
Description
Name the LTE connection. For example "LTE".
There are two PDP types:
⚫
IP
⚫
PPP
Set the communication standard of the access network to
be used.
For example "backupdp".
SJ-20210621164956-008 | 2022-09-01(R1.3)
Table 4-3.