Zte H1600 Maintenance Management Manual page 17

LED Indicator
USB
Phone
Service
*LAN1\LAN2\
LAN3\LAN4
⚫ The LAN1\LAN2\LAN3\LAN4 status indicator is on the LAN1\LAN2\LAN3\LAN4 port of the ZTE
H1600.
Top Panel
Figure 2-2
Figure 2-2 The Top Panel
Table 2-3
SJ-20210621164956-008 | 2022-09-01(R1.3)
Status
Solid green
Flashing slowly green
Flashing fast green
Off
Solid green
Off
Solid green
Flashing green
Off
Flashing yellow
Off
Solid green
Flashing green
shows the buttons on the top panel of the ZTE H1600.
describes the buttons on the top panel of the ZTE H1600.
Description
WPS access is successful. This solid-on light will be au-
tomatically off after 10 seconds.
WLAN terminal is in WPS accessing process.
The WPS accessing of the WLAN terminal is faulty.
The device is powered off or the USB interface is not
connected.
The USB interface is connected with USB device.
The device has not been registered to the VoIP network.
The device has registered to the VoIP network.
The incoming VoIP call set-up is in progress.
No action related to reset factory default or upgradation.
The device is FW upgrading or the configuration file is
upgrading.
The LAN connection has not been established.
The LAN connection has been established.
Data transmission is in processing, The indicator flashes
according to the LAN traffic.
2 Product Overview
9