Zte H1600 Maintenance Management Manual page 33

Parameter
IP Type
IP Address
Subnet Mask
Gateway
DNS1-DNS3
IPv6
IPv6 Info Acquire Mode
Request PD
Unnumbered Mode
GUA Allowed From
GUA
PD
SJ-20210621164956-008 | 2022-09-01(R1.3)
Description
By default, it is set to DHCP. Options:
⚫
DHCP: The DHCP server automatically allocates a dynamic
IP address to open the device.
⚫
Static: You need to specify a static IP address for the device.
⚫
IPoA: It is valid only if the WAN Type parameter is set to
DSL.
⚫
CLIP: Classical IP over ATM, IP packets to be transferred
over ATM mode through packet encapsulation.
WAN IP Address of ZTE H1600.
WAN subnet mask of ZTE H1600.
The IP address of the upstream gateway device connected to
the ZTE H1600.
IP address of the DNS server for static connections. You can set
up to three IP addresses for the server. These IP addresses are
provided by the ISP.
Specifies how to acquire IPv6 information for the WAN connec-
tion. It is valid only if the WAN connection supports IPv6.
The options are:
⚫
Manual :You need to set the global address, gateway, and
DNS acquisition modes.
⚫
Auto: The global address, gateway, and DNS acquisition
modes are automatically configured.
By default, the On button is selected.
By default, the On button is not selected. If it is selected,
Specifies how to acquire the global IPv6 address.
Specifies how to acquire the global IPv6 address. It is valid on-
ly when the IPv6 Info Get Mode parameter is set to be Manual
Mode. Options:
⚫
DHCPv6: The device acquires a global address through
DHCPv6. If no option is selected, it indicates that no address
acquisition mode is configured.
⚫
PD: You need to set a static IPv6 address.
⚫
SLAAC: The device generates a global address in accor-
dance with the RA packets from the upper-layer server.
Mode of obtaining global address.
Prefix delegation.
4 Configure the Internet
25