Zte H1600 Maintenance Management Manual page 43

Parameter
Egress
DSCP
3. Click Apply button to apply the changes.
Configure the MAC filter
1. Click MAC Filter to open the MAC filter page, see
Figure 4-15 MAC Filter Page
2. Configure the MAC filter configuration parameters, see
Table 4-7 Parameter Descriptions for the MAC Filter
Parameter
Name
Type
Protocol
Source MAC Address / Destination
MAC Address
SJ-20210621164956-008 | 2022-09-01(R1.3)
Description
Specify the data traffic direction. The Ingress option and
egress option cannot be the same.
⚫
If the ingress is LAN, the egress should be a WAN or LTE
connection. The data traffic direction is upstream.
⚫
If the ingress is a WAN or LTE connection, the egress
should be the LAN. The data traffic direction is down-
stream.
A DSCP is specified for the TOS byte in the IP header of each
packet to indicate the priority. Range: 0–63.
Figure
Description
The name of the MAC filter.
The default value is Routing.
Protocol of data streams. Options: IP, ARP, RARP, PPPoE
and Any.
MAC address that needs to be filtered.
Both options cannot be null at the same time.
4 Configure the Internet
4-15.
Table 4-7.
35