Zte H1600 Maintenance Management Manual page 32

ZTE H1600 Maintenance Management Guide
Parameter
SCR
MBS
Type
Service List
MTU
Link Type
PPP Transfer Type
PPP
Username/Password
*Authentication Type
*Connection Mode
*PPPoE Pass-through
IP Version
NAT
IPv4
24
Description
Sustainable Cell Rate.
If Service Type is selected to be VBR-rt or VBR-nrt, SCR needs
to be configured.
Maximum Burst Size.
If Service Type is selected to be VBR-rt or VBR-nrt, MBS needs
to be configured.
The connection type includes Routing and Bridge Connection.
In this case, Routing is selected.
Options: INTERNET, TR069 and VoIP.
This parameter must be consistent with service configuration.
For example, if INTERNET is selected, it indicates that the WAN
connection supports the Internet access service only. If TR069 is
selected, it indicates that the WAN connection supports remote
management.
Define the maximum transfer unit.
In this case, default value is 1492.
There are two link types: PPP and IP.
In this case, default value is PPPoE.
If DSL Transfer Mode is selected to be ATM, PPP Transfer
Type includes PPPoE and PPPoA.
PPPoE user name and password.
They are provided by the ISP.
There are three authentication types:
⚫
Auto
⚫
PAP
⚫
CHAP
There are two connection modes:
⚫
Always On
⚫
On Demand
Enable or disable the PPPoE Pass-through function.The default
configuration is on.
The IP version includes: IPv4, IPv6 and IPv4/v6
In this case, IPv4 is selected.
Enable or disable the NAT function.
SJ-20210621164956-008 | 2022-09-01(R1.3)