Configure The Sip Accounts - Zte H3140 Maintenance Management Manual

6.2 Configure the SIP Accounts

Abstract
This procedure describes how to configure basic parameters of the VoIP service, includ-
ing sip account, authorization username, password.
Steps
1. On the main page of the H3140, select VoIP > Basic. The SIP Account-1 page is
displayed, see
Figure 6-2 SIP Account-1 Page
2. Set the parameters. For a description of the parameters, refer to
Table 6-1 Parameter Descriptions for the SIP Account-1
Parameter
Enable
SIP Account
Authorization
Username
Password
3. Click Apply button to apply the changes.
SIP Account-2 configuration refers to SIP Account-1 configuration.
SJ-20210621164956-009 | 2021-12-07(R1.0)
Figure 6-2.
Description
Specifies whether to enable the VoIP service.
Registered name of a SIP subscriber. Normally, it is the phone number of the
subscriber.
Username for authentication by the SS system, which must be the same as
that configured in the SS system.
Password for VoIP service authentication by the SS system, which must be
the same as that configured in the SS system.
Note
6 Configure the VoIP
Table 6-1.
67