Configure The Lan(Ipv4) - Zte H1600 Maintenance Management Manual

Figure 5-14 WiFi SSID IsolationWiFi SSID IsolationPage
2. Click On and then click the Apply button to enable the WiFi SSID isolation function.

5.3 Configure the LAN(IPv4)

The section describes how to configure LAN(IPv4).
The relevant information of Internet status includes Allocated Address(DHCP), DHCP
Server, DHCP Binding and Port Control.
Steps
Check the Allocated Address(DHCP)
1. On the main page of the ZTE H1600, select Local Network > LAN > IPv4 to open
the IPv4 page.
2. Click Allocated Address(DHCP) to view the allocated addresses, see
Figure 5-15 Allocated Address(DHCP) Page
3. Click Refresh to refresh the informations.
Configure the DHCP Server
1. Click DHCP Server to open the configuration, see
SJ-20210621164956-008 | 2022-09-01(R1.3)
5 Configure the Local Network
Figure 5-16.
Figure 5-15.
57